Extracting Carpet Cleaning Oil From Carpets


A person sitting on a rock next to a body of water

To better understand this, we’ll take a look at the main functions each of these methods serve. By the time you’ve finished reading this article, you’ll know more about the common misconceptions about these methods!

In order for carpet cleaning or oil extraction to be successful, both the process and materials used must serve a purpose. Firstly, the carpet must be free of any obstructions so as to extract the excess oil. With oil left in the carpet, it will attract dirt and potentially stain and damage the carpet fibres.

Carpet Shampooing

A vacuum sitting on top of a table

There are many different types of carpet cleaning machines out there that can help achieve this. The most common technique is carpet shampooing. This involves the cleaning of the carpet with specially designed cleaning liquids which remove any dirt, grease and debris attached to the fibres. Before using any shampoo on your carpet, make sure that you have read the instructions carefully. It’s important to choose the right one – if you don’t you may end up wasting your time and money. Always test out a small area of the carpet before attempting a bigger area.

A second method is steam cleaning. This involves a carpet cleaning machine working underneath the carpet in search of any stubborn grime and oil. The carpet is exposed to high temperatures and chemicals are then released gradually over a period of time. This method of cleaning is also very effective but does carry a certain degree of risk. Small amounts of water may be released from the carpet when cleaning so it’s best to use a wet vacuum rather than an air compressor.

Carpet Extractions

A close up of a toy

Carpet extractions involve the introduction of specialised tools and products into the carpet. As well as carpet cleaning fluids extraction fluids can sometimes be required. Extraction machines work by moving the liquid into a chemical container where it is stored until it can be removed. The most common product used in this process is a carpet deodorant.

Vacuum extractions are another common method of carpet cleaning. This process involves the moving of the carpet a long distance away from the area being cleaned. High powered machinery is used to carry out this task. This type of extraction usually carries a small but potentially serious risk of injury. If extraction occurs without enough preparation time, the product and the machinery could be damaged. Some carpets can even suffer damage beyond repair if this method is not followed correctly.

Oil Extraction

Oil extraction can be combined with other techniques to give a more thorough carpet cleaning. For example, some people choose to combine carpet cleaning with steam extraction to remove dirt and grime from deep within the fibres. This method is not suitable for all carpets and so it’s important to check the carpet’s construction before using this technique. Other techniques such as shampooing or bonnet cleaning can also be combined with extraction for a more complete clean.

Extractions can take place in one of two ways. The first technique involves pumping a high-pressure jet of water at high pressure into a carpet. The water vapor is sucked into the carpet and then extracted through small vacuum flaps. The second technique uses a pump-driven, belt-driven unit. The pump forces hot water into the carpet from the top side of the flaps, then the water is extracted using a vacuum system.

Subscribe to our monthly Newsletter
Subscribe to our monthly Newsletter